Updating ami bios
The non-K OC is really easy and can be done within few minutes.
Few days ago I published a short article about overclocking non-K CPUs.
After the flashtool has successfully updated your BIOS, it normally should display a short message like "100% OK, please restart the PC", but we still have to do some things before restarting the PC: Everything ok? Commands: /O = Save current ROM image to file /U = Display ROM File's ROMID /S = Refer to Options: /S /D = Verification test of given ROM File without flashing BIOS. /E = Program Embedded Controller Block /ME = Program ME Entire Firmware Block. /A = Oem Activation file /OAD = Delete Oem Activation key /CLNEVNLOG = Clear Event Log. /cc = clear CMOS after Programming /cd = clear DMI after Programming /cp = clear PNP(ESCD) after Programming /py = program Flash Memory /pn = don't program Flash Memory /sy = save the old BIOS to: "OLDBIOS.
Please read the README files from your Mainboard manufacturer or PC manufacturer.Pre-Skylake CPUs such as Haswell or Devils Canyon could only be overclocked by about 3-5% using the BCLK because the BCLK was still tied to the DMI and the PCIe.